Hi,
Can anyone help me to get any improvement in my speed or is this the best I can expect.
http://www.speedtest.net/result/1931212442.png
Paul.
Mode: ADSL_2plus
Traffic Type: ATM
Status: Up
Link Power State: L0
Downstream Upstream
Line Coding(Trellis): On On
SNR Margin (0.1 dB): 66 56
Attenuation (0.1 dB): 255 111
Output Power (0.1 dBm): 210 124
Attainable Rate (Kbps): 18004 21235
Path 0 Path 1
Downstream Upstream Downstream Upstream
Rate (Kbps): 14659 1072 0 0
MSGc (# of bytes in overhead channel message): 52 14 0 0
B (# of bytes in Mux Data Frame): 254 134 0 0
M (# of Mux Data Frames in FEC Data Frame): 1 1 0 0
T (Mux Data Frames over sync bytes): 2 1 0 0
R (# of check bytes in FEC Data Frame): 0 0 0 0
S (ratio of FEC over PMD Data Frame length): 0.5555 4.0 0.0 0.0
L (# of bits in PMD Data Frame): 3672 270 0 0
D (interleaver depth): 1 1 0 0
Delay (msec): 0.13 1.0 0.0 0.0
INP (DMT symbol): 0.0 0.0 0.0 0.0
Can anyone help me to get any improvement in my speed or is this the best I can expect.
http://www.speedtest.net/result/1931212442.png
Paul.
Mode: ADSL_2plus
Traffic Type: ATM
Status: Up
Link Power State: L0
Downstream Upstream
Line Coding(Trellis): On On
SNR Margin (0.1 dB): 66 56
Attenuation (0.1 dB): 255 111
Output Power (0.1 dBm): 210 124
Attainable Rate (Kbps): 18004 21235
Path 0 Path 1
Downstream Upstream Downstream Upstream
Rate (Kbps): 14659 1072 0 0
MSGc (# of bytes in overhead channel message): 52 14 0 0
B (# of bytes in Mux Data Frame): 254 134 0 0
M (# of Mux Data Frames in FEC Data Frame): 1 1 0 0
T (Mux Data Frames over sync bytes): 2 1 0 0
R (# of check bytes in FEC Data Frame): 0 0 0 0
S (ratio of FEC over PMD Data Frame length): 0.5555 4.0 0.0 0.0
L (# of bits in PMD Data Frame): 3672 270 0 0
D (interleaver depth): 1 1 0 0
Delay (msec): 0.13 1.0 0.0 0.0
INP (DMT symbol): 0.0 0.0 0.0 0.0