{"id":12423,"date":"2016-09-19T00:15:58","date_gmt":"2016-09-18T23:15:58","guid":{"rendered":"http:\/\/www.ispreview.co.uk\/?p=12423"},"modified":"2017-09-04T14:24:57","modified_gmt":"2017-09-04T13:24:57","slug":"sckipio-interview-can-expect-bts-g-fast-broadband-tech","status":"publish","type":"post","link":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html","title":{"rendered":"Sckipio Interview &#8211; What Can We Expect from BT&#8217;s G.fast Broadband Tech"},"content":{"rendered":"<p>The co-founder and CEO of <a href=\"http:\/\/www.sckipio.com\/\" target=\"_blank\">Sckipio Technologies<\/a>, David Baum, has suggested to ISPreview.co.uk that <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/go\/britishtelecom\" rel=\"nofollow\" target=\"_blank\">BT<\/a>&#8217;s plan to roll-out 300Mbps <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/gfast\">G.fast<\/a> broadband technology could save as much as \u00a3980 per home vs a pure fibre optic (<a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/ftth\">FTTH<\/a>\/P) network and even faster speeds should be possible in the future.<\/p>\n<p><!--more--><\/p>\n<p>Israel-based Sckipio knows a thing or two about the new <strong><a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/gfast\">G.fast<\/a><\/strong> (ITU G.9700\/9701) technology because they helped to create about 20% of the technical standard. On top of that they&#8217;ve also assisted with <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/openreach\" target=\"_blank\">Openreach<\/a>&#8217;s (<a href=\"https:\/\/www.ispreview.co.uk\/index.php\/go\/britishtelecom\" rel=\"nofollow\" target=\"_blank\">BT<\/a>) trials of the service, which is important because the operator hopes to start rolling out across the United Kingdom in 2017.<\/p>\n<p><a href=\"https:\/\/www.ispreview.co.uk\/index.php\/go\/britishtelecom\" rel=\"nofollow\" target=\"_blank\">BT<\/a> currently intends to make <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/gfast\">G.fast<\/a> available to 10 million premises by 2020, with &#8220;<a href=\"http:\/\/www.ispreview.co.uk\/index.php\/2015\/10\/bt-and-alcatel-lucent-hit-5600mbps-broadband-using-xg-fast-tech.html\" target=\"_blank\"><em>most of the UK<\/em><\/a>&#8221; likely to be done by 2025 (we predict around 60% UK coverage). Initially G.fast will only offer top download speeds of &#8216;up to&#8217; 300Mbps (50Mbps upload), but there is talk of later increasing this to 500Mbps.<\/p>\n<p>According to <strong>David Baum<\/strong>, the &#8220;<em>strategy is to build a copper technology that feels like [a pure fibre optic connection] to the user<\/em>&#8220;, which they say means delivering ultra-fast speeds, very low latency, breakthrough stability, very fast recovery times and very fast training times.<\/p>\n<p>But unlike a pure fibre optic connection, such as <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/ftth\">FTTH<\/a>\/P, the hybrid-fibre approach adopted by G.fast still depends on reusing a stretch of existing copper cable and so should be significantly cheaper and faster to deploy than pure fibre. Baum suggests a saving of as much as $1,300 (\u00a3980) per household, but experiences will vary.<\/p>\n<p>However others fear that the bold ambition of G.fast&#8217;s performance may struggle to deliver in the real-world environment. Naturally ISPreview.co.uk wanted to know more and so we caught up with David Baum to ask him a few additional questions. But before that, here&#8217;s a simplified explanation of how the new technology works..<\/p>\n<h3><span style=\"color: #339966;\"><strong>What is G.fast?<\/strong><\/span><\/h3>\n<p>The technology itself (<a href=\"http:\/\/www.ispreview.co.uk\/index.php\/2016\/05\/bt-release-tech-details-uk-summer-pilot-300mbps-g-fast-broadband.html\">see our technical summary<\/a>) works in a roughly similar way to the current &#8216;up to&#8217; 80Mbps capable <strong>Fibre-to-the-Cabinet<\/strong> (<a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/fttc\">FTTC<\/a>) service that is available to most of the UK, where a fibre optic cable is run from an exchange to your local <strong>Street Cabinet<\/strong> and then the remaining copper line to your home uses <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/vdsl\">VDSL2<\/a> to deliver the service.<\/p>\n<div align=\"center\"><img decoding=\"async\" class=\"ngg-singlepic ngg-none\" src=\"\/\/www.ispreview.co.uk\/wp-content\/gallery\/bt-openreach-uk-illustrations\/gfast_broadband_bt_network_diagram.gif\" alt=\"g.fast broadband bt network diagram\" \/><br \/>\nOfficial BT G.fast Diagram (hasn&#8217;t been updated show the new &#8220;<em>pod<\/em>&#8221; approach)<\/div>\n<p>However G.fast requires significantly more spectrum (G.fast 106MHz+ vs <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/vdsl\">VDSL2<\/a> 17MHz+) and thus it can only deliver its best speeds over much shorter copper lines (less than around 300-350 metres for 300Mbps+). Furthermore <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/openreach\" target=\"_blank\">Openreach<\/a> now intends to roll-out G.fast via an extension pod on their existing PCP street cabinets (<a href=\"http:\/\/www.ispreview.co.uk\/index.php\/2016\/06\/bt-openreach-reveals-g-fast-broadband-cabinet-extension-pod.html\">here<\/a>), but they can also deploy it from smaller nodes.<\/p>\n<p>The smaller nodes could be built either underground (manholes), inside big buildings or placed on top of nearby telegraph poles, usually with a small power supply cabinet sitting nearby. The smaller nodes would most likely deliver even faster speeds because the fibre optic cable would often come closer to homes via a more expensive <strong>Fibre-to-the-distribution-point<\/strong> (FTTdp) network .<\/p>\n<p>In theory it&#8217;s possible to pull Gigabit (1000Mbps+) speeds out of a G.fast network, but this is only possible over a few tens of metres (copper cable) and therefore does not reflect most real-world networks where the copper lines from a street cabinet can be hundreds of even several thousand metres long. An aggressive FTTdp roll-out would be needed to deliver such speeds.<\/p>\n<h3><span style=\"color: #339966;\"><strong>The Sckipio G.fast Interview<\/strong><\/span><\/h3>\n<p><strong>1. Sckipio is a company in Israel that seems to have come out of almost nowhere in 2012 and has since dedicated itself towards helping to develop specifications and hardware for the ITU&#8217;s new G.Fast broadband technology (we believe you helped to create about 20% of the technical standard).<\/strong><\/p>\n<p><strong>Can you tell us a little about the story of how Sckipio came about and what drew it to focus on G.fast so exclusively?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>I have been involved in the wired networking space for 20 years. At my last company, we were a leader in wired home networking. I sold that company successfully, and when I left the company, I started to think about doing something new. I realized that there was enough bandwidth in the home. But, bandwidth to the home was now the bottleneck. It was very challenging to receive 1Gbps bandwidth to the home.<\/p>\n<p>I wondered, \u201c<em>What is the next step for broadband access?<\/em>\u201d What are the telcos asking for? I went and visited the <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/ftth\">FTTH<\/a> show in Florida and I started to talk to installers. I realized that fibre wasn\u2019t the best solution. It was too expensive to install. The cost of trenching, the scheduling of appointments, the in-home installation would take forever. It\u2019s not that the technology is expensive \u2013 it\u2019s the physics, the logistics. That\u2019s never going to change.<\/p>\n<p>Doing the math of how much telcos can save using copper instead of fibre, it was clear there was a business case. We realized the opportunity was there, the market was there, the requirement was there and there was little competition. That\u2019s why we made the investment.<\/p><\/blockquote>\n<p><strong>2. G.fast appears to deliver most of its performance improvements vs today\u2019s loosely similar VDSL broadband technology by harnessing more spectrum frequency, using shorter runs of copper cable, adjusting its power and adopting Vectoring as standard to help reduce cross-talk interference. Can you tell us about any other ways in which G.fast as a technology has improved upon VDSL?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>G.fast is not an xDSL technology, but it does leverage best practices and experiences learned in xDSL, G.hn, <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/wifi\">WiFi<\/a>, HomePNA, and many other communications technologies. It has several key attributes.<\/p>\n<p>Our strategy is to build a copper technology that feels like fibre to the user. This means delivering very low latency, the fewest dead zones, breakthrough stability, very fast recovery times, and very fast training times. Plus, it uses TDD to deliver more flexibility in the upstream and downstream ratio.<\/p><\/blockquote>\n<p><strong>3. In the UK, <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/go\/vm\" rel=\"nofollow\" target=\"_blank\">Virgin Media<\/a> has recently committed to ensure that over 1 million premises are reached by using ultrafast Fibre-to-the-Premise (<a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/fttp\">FTTP<\/a>) technology and BT have similarly pledged to cover 2 million premises.<\/strong><\/p>\n<p><strong>Cost is often highlighted as one of the primary reasons why operators with a lot of copper cable in their network prefer hybrid-fibre approaches like VDSL and <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/docsis\">DOCSIS<\/a>.<\/strong><\/p>\n<p><strong>Considering the full distance of a connection from exchange to the end-user\u2019s home socket, how do the costs between rolling out <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/fttp\">FTTP<\/a>\/H vs G.fast compare?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>We have found the cost savings of using G.fast instead of fibre can be as much as $1,300 (\u00a3980) or more per household. That said, each service provider has a different architecture and different costs in terms of labour, methods of bringing fibre closer, etc. So specific rates will vary.<\/p><\/blockquote>\n<p><strong>4. Some of Sckipio\u2019s hardware has been used in BT\u2019s G.fast trials. Can you tell us a little bit more about how you assisted in the trials and what you learnt from taking part?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>We have performed testing both in the BT labs and in the field. This has given us a broader range of scenarios and experiences \u2013 which will make it possible for us to optimize the technology further and handle all kinds of situations in a much quicker way. This knowledge is hard to replicate and enhances Sckipio\u2019s DPU leadership versus rivals.<\/p>\n<p>We learned about different kinds of wires and different cross-talk conditions, how to optimize our performance and handle things we don\u2019t have in the lab. This has helped us verify our stability performance and identify ways to make our stability even stronger.<\/p>\n<p>We also discovered the real-world Sckipio performance over long distances is outstanding. This is appreciated by all kinds of service providers who are looking to utilize existing infrastructure to improve their business case and improve the penetration rates with minimal incremental investments.<\/p><\/blockquote>\n<p><strong>5. <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/openreach\" target=\"_blank\">Openreach<\/a> (BT) has hinted that they should be able to deliver G.fast broadband speeds of 300Mbps download and 50Mbps upload over a single (NOT bonded) copper line distance of 350 metres in the United Kingdom. However their recent trials struggled to deliver this at the desired distance (<a href=\"http:\/\/www.ispreview.co.uk\/index.php\/2016\/07\/bts-trevor-linney-reveals-g-fast-broadband-uk-trial-results-speed.html\">here<\/a>), although a number of future improvements were suggested that could make it achievable.<\/strong><\/p>\n<blockquote><p><span style=\"color: #339966;\"><strong>BT&#8217;s Planned G.fast Enhancements<\/strong><\/span><br \/>\n<strong>* Enable higher bits per tone (12&gt;14)<\/strong><br \/>\n<strong> * Improve the receiver sensitivity (&lt;-150dBm\/Hz)<\/strong><br \/>\n<strong> * Increase the transmit power (4&gt;8dBm)<\/strong><br \/>\n<strong> * Optimise the frequency usage with VDSL<\/strong><br \/>\n<strong> * Increased vectoring group sizes (&gt;96)<\/strong><\/p><\/blockquote>\n<p><strong>Does this sound about right to you and what other changes might be needed in order to deliver upon BT\u2019s aspiration of 300Mbps at 350 metres?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>BT is an active participant in the ITU and brought many of these requirements to the working group. As a result, most of these features are now part of the G.fast standard. All of these features will contribute to higher performance at longer distances.<\/p>\n<p>It is true that as the distance grows, more subscribers can be reached from a single central office. Therefore, there is a need for vectoring with higher port counts and we should expect higher densities in the near future. Already, Sckipio is shipping 24-port vectoring and demonstrated 32-port vectoring last fall. The ITU has made some modifications to the standard to support a large number of ports (e.g. 96).<\/p>\n<p>In summary, increasing the number of bits per carrier helps mainly for shorter lines, where the SNR is relatively high. On the other hand, lower receiver noise floor and higher transmit power help improve performance over long lines.<\/p>\n<p>Better utilization of the VDSL band also helps improve performance over long lines as it allows G.fast to use lower frequencies, where the line attenuation is lower.<\/p><\/blockquote>\n<p><!--nextpage--><\/p>\n<p><strong>6. Originally G.fast was more intended to be used alongside a Fibre-to-the-distribution-point (FTTdp) style network, with fibre optic cables being pushed closer to homes via telegraph poles and underground nodes.<\/strong><\/p>\n<p><strong>However some operators appear to have side-lined that in favour of installing G.fast kit alongside \/ inside their existing PCP street cabinets, not least thanks to improvements in the technology making it more viable to adopt this approach.<\/strong><\/p>\n<p><strong>But G.fast\u2019s limited copper loop range suggests that expanding beyond the reach of existing street cabinets may still require many extra cabinets or FTTdp. Is this something that might have a significant impact on future deployment costs, making expansion beyond the first 40-50% of an operator\u2019s network footprint (i.e. the easy low hanging fruit) very expensive?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>Sckipio has delivered breakthrough rates at longer distances than was thought possible \u2013 such as over 300Mbps at 300 meters. Plus, improvements in the standard will also improve performance at longer distances. This has made the business case for G.fast even more attractive since each additional meter reached by G.fast can be used to deliver real economic benefits for service providers.<\/p>\n<p>We now believe it is feasible for G.fast to deliver over 100Mbps at over 500 meters over twisted pair. Adding in Sckipio\u2019s unprecedented dynamic time assignment (also called DTA or DBA), symmetric 100Mbps at that distance is possible. In some markets, bonding will become a popular use-case of G.fast. This will allow up to 200Mbps in both directions at 500 meters.<\/p>\n<p>Clearly, pulling fibre closer to the residence is going to cost money. However, that is inevitable in more rural locations. Yet, the good news for G.fast is the costs associated with installing fibre in the home are not going to change. This means that as long as G.fast provides the performance desired, G.fast would always be cheaper to install than FTTH since it eliminates the in-home install.<\/p>\n<p>Also, G.fast provides a very fast path to positive cash flow. This will free up the working capital for fibre to be pulled further in. Fortunately, by leveraging long-reaching performance and larger densities (which are coming), service providers will be able to keep the costs low.<\/p><\/blockquote>\n<p><strong>7. Openreach (BT) has indicated that their G.fast service could eventually reach a top download speed of 500Mbps by 2025. We know that G.fast can deliver into the Gigabit territory at very short distances, although the 500Mbps rate chosen by BT is likely to be a reflection of mass market reality with many millions of UK premises existing within 200 \u2013 300 metres of a distribution point \/ street cabinet.<\/strong><\/p>\n<p><strong>By today\u2019s standard, how long would a single (not bonded) copper line need to be (metres) in order for G.fast to deliver a download speed of 500Mbps and what kind of upload speeds could we expect to see at that level of performance? In keeping with that, what changes might be needed to make 500Mbps viable over roughly 300 metres of copper, if that\u2019s possible (without line bonding)?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>When utilizing the full 106Mhz of spectrum, G.fast has the ability to deliver 500Mbps at 200-300 meters today. BT today runs both G.fast and VDSL concurrently. This limits the speed of G.fast since the high capacity lower frequencies are occupied. Over time, the VDSL subscribers will disappear and BT will probably be able to use the entire capacity of the line &#8211; resulting in improved performance.<\/p><\/blockquote>\n<p><strong>8. Historically higher performance <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/adsl\">DSL<\/a> based copper broadband connections haven\u2019t always worked at their best when they\u2019ve been asked to function over similarly long distances of aluminium cable, which is still present in some parts of the UK network.<\/strong><\/p>\n<p><strong>In addition, we note that telecoms operators often tend to use copper cables with different levels of thickness \/ quality. How does G.fast fair on aluminium vs copper lines and is the thickness of a copper line a problem for the technology?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>Generally speaking, higher gauge copper wires (0.5mm and 0.6mm) are found closer to the home and are generally higher quality (lower attenuation) than wires found closer to the central office. The higher attenuation wires are likely to be replaced by fibre &#8211; resulting in a generally better infrastructure than traditional <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/adsl\">DSL<\/a>.<\/p>\n<p>Having mixed wire thicknesses can generate reflections, which can cause notches and impact performance. Fortunately, by replacing the segments that are closest to the central office with fibre, the impact from mixed wired environments has lessened in G.fast than VDSL.<\/p>\n<p>In addition, G.fast has in many cases so much extra channel capacity, elements like bridge taps can be overcome while still giving the consumer all the speed they require.<\/p>\n<p>We have experienced many harsh test environments and challenging wiring configurations. All this experience has helped Sckipio to develop a lot of unique skills to overcoming difficult environments.<\/p><\/blockquote>\n<p><strong>9. What are the power supply requirements of rolling out G.fast in comparison to the same sort of costs for deployment of the last generation <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/fttc\">FTTC<\/a>\/VDSL services, which were sometimes known to have quite expensive power supply demands \/ costs (ignoring parasitical power for now as BT will not be making use of a customer\u2019s own electricity supply)?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>In VDSL \u2013 power consumption is dominated by its transmit power \u2013 G.fast transmit power is significantly lower. In addition, G.fast supports discontinuous operation, TDD and other product savings\/power reduction features. As a result, G.fast has a very small power footprint.\u00a0 Overall, we expect the power consumption for G.fast to be similar to VDSL and not significantly bigger.<\/p><\/blockquote>\n<p><strong>10. One of the problems with having <a href=\"https:\/\/www.ispreview.co.uk\/index.php\/link\/vdsl\">VDSL2<\/a> and G.fast in the same environment, which is often necessary for co-existence between the old and new service, is that VDSL takes some of the spectrum away from G.fast and that can impact the top speed of the new technology. What is the best approach to tackling this and how much of a performance difference does it really make if you remove VDSL2?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>Co-existence between VDSL and G.fast is easy with Sckipio. We optimize the robustness when running both VDSL and G.fast concurrently. The G.fast is simply notched at the frequencies above VDSL. As mentioned above, there is clearly large capacity at the lower frequencies.<\/p>\n<p>Over short distances, as much as 200Mbps can be lost due to co-existence with VDSL. However, in the near term, there is so much excess capacity at the short distances, it isn\u2019t an issue.<\/p>\n<p>In the longer loops, there are more issues. For loop lengths of 300 meters, the impact of VDSL co-existence is substantial. For example, by eliminating co-existence at 300 meters, an operator could reclaim as much as 150Mbps of extra capacity \u2013 which is very significant.<\/p><\/blockquote>\n<p><strong>11. At present all of the talk is about G.fast, but we\u2019ve also heard about a future follow-up technology called XG.FAST that could deliver even faster speeds, albeit requiring more spectrum, power and a significant reduction in the copper line distance between the node \/ distribution point and homes.<\/strong><\/p>\n<p><strong>For example, last year BT and Alcatel-Lucent conducted a lab test of XG.Fast that was able to achieve aggregate speeds of 5.6Gbps (Gigabits per second) over 35 metres of copper cable. Has Sckipio looked at this technology and if so, what do you think are its pros and cons with regards to future adoption. Plus, how long before we might see it as a commercial product?<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>XGFAST is not an ITU standard, but a technology demo from a specific player in the market. The good news is it demonstrates there is tremendous capacity in existing copper wires. Yet, this is not a technology that is in demand right now. There is no active work in the ITU around this technology since the need for such capacities won\u2019t be required for years to come. Plus, to achieve such performance, fibre will need to be pulled very close to the residence \u2013 which is still years away as well.<\/p><\/blockquote>\n<p><strong>12. Finally, do you think that XG.Fast will present a problem for operators that have chosen to deploy G.fast from their street cabinets instead of going down the fibre rich FTTdp path? This is relevant because XG.Fast prefers ultra-short runs of copper, while G.fast can work reasonably well over a few hundred metres.<\/strong><\/p>\n<blockquote><p><span style=\"text-decoration: underline;\">ANSWER:<\/span><\/p>\n<p>To begin with, G.fast is a technology that will have a long life and we don\u2019t see XG.Fast as an imminent technology. The current standard supports 106Mhz of spectrum and shortly 212Mhz of spectrum will be specified.\u00a0 Initially, this technology will be deployed in various distances \u2013 from short loops out to longer loops. Clearly, improvements in the technology made by Sckipio and additional improvements made to the standard are making it possible to deliver G.fast benefits out to even 500 meters. This has made the business case for G.fast even stronger.<\/p>\n<p>Eventually, though, we do agree that as demands for bandwidth grow, there will be a need to shorten loop lengths. The first thing we expect operators to do is to move DPUs closer to the residence. For example, by moving an existing G.fast DPU from 500 meters to 100 meters could improve the performance by 4-5x \u2013 all without the need for higher frequencies in XG.Fast. Moreover, as we move to 212Mhz, the potential performance of G.fast over short loops will be as much as 10x faster than G.fast at long loops such as 500 meters. Therefore, G.fast over short loops should satisfy most demand simply by shortening the loop lengths with existing technology.<\/p>\n<p>Please remember, telcos don\u2019t invest too far ahead of the real performance demand. For example, 5Gbps is something like 50 concurrent streams of 8KTV \u2013 not something we expect to need any time soon.<\/p><\/blockquote>\n<p>ISPreview.co.uk would just like to thank David Baum for agreeing to take part in this interview, which has helped to shed further light on how G.fast works and what it could mean for BT&#8217;s forthcoming roll-out in the UK.<\/p>\n","protected":false},"excerpt":{"rendered":"<p>The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT&#8217;s plan to roll-out 300Mbps G.fast broadband technology could save as much as \u00a3980 per home vs a pure fibre optic (FTTH\/P) network and even faster speeds should be possible in the future.<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"ngg_post_thumbnail":0,"footnotes":""},"categories":[1],"tags":[474,52,420,417,69,482],"class_list":["post-12423","post","type-post","status-publish","format-standard","hentry","category-uk_isp_news","tag-bt","tag-fibre-optic","tag-fttdp","tag-g-fast","tag-bt-openreach","tag-xg-fast"],"share_on_mastodon":{"url":"","error":""},"yoast_head":"<!-- This site is optimized with the Yoast SEO plugin v28.9 - https:\/\/yoast.com\/product\/yoast-seo-wordpress\/ -->\n<title>Sckipio Interview - What Can We Expect from BT&#039;s G.fast Broadband Tech - ISPreview UK<\/title>\n<meta name=\"description\" content=\"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT&#039;s plan to roll-out 300Mbps G.fast broadband\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\" \/>\n<link rel=\"next\" href=\"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\/2\" \/>\n<meta property=\"og:locale\" content=\"en_GB\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Sckipio Interview - What Can We Expect from BT&#039;s G.fast Broadband Tech - ISPreview UK\" \/>\n<meta property=\"og:description\" content=\"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT&#039;s plan to roll-out 300Mbps G.fast broadband\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\" \/>\n<meta property=\"og:site_name\" content=\"ISPreview UK\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/ispreview\" \/>\n<meta property=\"article:author\" content=\"https:\/\/www.facebook.com\/ispreview\" \/>\n<meta property=\"article:published_time\" content=\"2016-09-18T23:15:58+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2017-09-04T13:24:57+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2020\/07\/ispreview_uk_logo.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"1000\" \/>\n\t<meta property=\"og:image:height\" content=\"1000\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Mark Jackson\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:creator\" content=\"@ispreview\" \/>\n<meta name=\"twitter:site\" content=\"@ispreview\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"Mark Jackson\" \/>\n\t<meta name=\"twitter:label2\" content=\"Estimated reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"16 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"NewsArticle\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\"},\"author\":{\"name\":\"Mark Jackson\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#\\\/schema\\\/person\\\/de66a8b4e937c21c80e443d1bf9c35d5\"},\"headline\":\"Sckipio Interview &#8211; What Can We Expect from BT&#8217;s G.fast Broadband Tech\",\"datePublished\":\"2016-09-18T23:15:58+00:00\",\"dateModified\":\"2017-09-04T13:24:57+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\"},\"wordCount\":3318,\"commentCount\":23,\"publisher\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#organization\"},\"keywords\":[\"BT\",\"Fibre Optic\",\"FTTdp\",\"G.fast\",\"Openreach\",\"XG.FAST\"],\"articleSection\":[\"ISP News\"],\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"CommentAction\",\"name\":\"Comment\",\"target\":[\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html#respond\"]}]},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\",\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\",\"name\":\"Sckipio Interview - What Can We Expect from BT's G.fast Broadband Tech - ISPreview UK\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#website\"},\"datePublished\":\"2016-09-18T23:15:58+00:00\",\"dateModified\":\"2017-09-04T13:24:57+00:00\",\"description\":\"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT's plan to roll-out 300Mbps G.fast broadband\",\"inLanguage\":\"en-GB\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/2016\\\/09\\\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\"]}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#website\",\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/\",\"name\":\"ISPreview UK\",\"description\":\"Top Broadband ISP and Mobile Provider Information Site\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#organization\"},\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/www.ispreview.co.uk\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-GB\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#organization\",\"name\":\"ISPreview.co.uk\",\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/wp-content\\\/uploads\\\/2020\\\/07\\\/ispreview_uk_logo.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ispreview.co.uk\\\/wp-content\\\/uploads\\\/2020\\\/07\\\/ispreview_uk_logo.jpg\",\"width\":1000,\"height\":1000,\"caption\":\"ISPreview.co.uk\"},\"image\":{\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/ispreview\",\"https:\\\/\\\/x.com\\\/ispreview\",\"https:\\\/\\\/www.linkedin.com\\\/in\\\/mjack\\\/\",\"https:\\\/\\\/bsky.app\\\/profile\\\/ispreview.bsky.social\",\"https:\\\/\\\/mastodon.social\\\/@ispreview\"]},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/#\\\/schema\\\/person\\\/de66a8b4e937c21c80e443d1bf9c35d5\",\"name\":\"Mark Jackson\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-GB\",\"@id\":\"https:\\\/\\\/www.ispreview.co.uk\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/nggallery_import\\\/Mark-Jackson-96x96.jpg\",\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/nggallery_import\\\/Mark-Jackson-96x96.jpg\",\"contentUrl\":\"https:\\\/\\\/www.ispreview.co.uk\\\/wp-content\\\/uploads\\\/2023\\\/01\\\/nggallery_import\\\/Mark-Jackson-96x96.jpg\",\"caption\":\"Mark Jackson\"},\"description\":\"By Mark Jackson Mark is a professional technology writer, IT consultant and computer engineer from Dorset (England), he also founded ISPreview in 1999 and enjoys analysing the latest telecoms and broadband developments. Find me on X (Twitter), Mastodon, Facebook, BlueSky, Threads.net and Linkedin.\",\"sameAs\":[\"http:\\\/\\\/www.ispreview.co.uk\",\"https:\\\/\\\/www.facebook.com\\\/ispreview\",\"https:\\\/\\\/x.com\\\/ispreview\"],\"url\":\"https:\\\/\\\/www.ispreview.co.uk\\\/index.php\\\/author\\\/markj\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Sckipio Interview - What Can We Expect from BT's G.fast Broadband Tech - ISPreview UK","description":"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT's plan to roll-out 300Mbps G.fast broadband","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html","next":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html\/2","og_locale":"en_GB","og_type":"article","og_title":"Sckipio Interview - What Can We Expect from BT's G.fast Broadband Tech - ISPreview UK","og_description":"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT's plan to roll-out 300Mbps G.fast broadband","og_url":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html","og_site_name":"ISPreview UK","article_publisher":"https:\/\/www.facebook.com\/ispreview","article_author":"https:\/\/www.facebook.com\/ispreview","article_published_time":"2016-09-18T23:15:58+00:00","article_modified_time":"2017-09-04T13:24:57+00:00","og_image":[{"width":1000,"height":1000,"url":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2020\/07\/ispreview_uk_logo.jpg","type":"image\/jpeg"}],"author":"Mark Jackson","twitter_card":"summary_large_image","twitter_creator":"@ispreview","twitter_site":"@ispreview","twitter_misc":{"Written by":"Mark Jackson","Estimated reading time":"16 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"NewsArticle","@id":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html#article","isPartOf":{"@id":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html"},"author":{"name":"Mark Jackson","@id":"https:\/\/www.ispreview.co.uk\/#\/schema\/person\/de66a8b4e937c21c80e443d1bf9c35d5"},"headline":"Sckipio Interview &#8211; What Can We Expect from BT&#8217;s G.fast Broadband Tech","datePublished":"2016-09-18T23:15:58+00:00","dateModified":"2017-09-04T13:24:57+00:00","mainEntityOfPage":{"@id":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html"},"wordCount":3318,"commentCount":23,"publisher":{"@id":"https:\/\/www.ispreview.co.uk\/#organization"},"keywords":["BT","Fibre Optic","FTTdp","G.fast","Openreach","XG.FAST"],"articleSection":["ISP News"],"inLanguage":"en-GB","potentialAction":[{"@type":"CommentAction","name":"Comment","target":["https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html#respond"]}]},{"@type":"WebPage","@id":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html","url":"https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html","name":"Sckipio Interview - What Can We Expect from BT's G.fast Broadband Tech - ISPreview UK","isPartOf":{"@id":"https:\/\/www.ispreview.co.uk\/#website"},"datePublished":"2016-09-18T23:15:58+00:00","dateModified":"2017-09-04T13:24:57+00:00","description":"The co-founder and CEO of Sckipio Technologies, David Baum, has suggested to ISPreview.co.uk that BT's plan to roll-out 300Mbps G.fast broadband","inLanguage":"en-GB","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.ispreview.co.uk\/index.php\/2016\/09\/sckipio-interview-can-expect-bts-g-fast-broadband-tech.html"]}]},{"@type":"WebSite","@id":"https:\/\/www.ispreview.co.uk\/#website","url":"https:\/\/www.ispreview.co.uk\/","name":"ISPreview UK","description":"Top Broadband ISP and Mobile Provider Information Site","publisher":{"@id":"https:\/\/www.ispreview.co.uk\/#organization"},"potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.ispreview.co.uk\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-GB"},{"@type":"Organization","@id":"https:\/\/www.ispreview.co.uk\/#organization","name":"ISPreview.co.uk","url":"https:\/\/www.ispreview.co.uk\/","logo":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.ispreview.co.uk\/#\/schema\/logo\/image\/","url":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2020\/07\/ispreview_uk_logo.jpg","contentUrl":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2020\/07\/ispreview_uk_logo.jpg","width":1000,"height":1000,"caption":"ISPreview.co.uk"},"image":{"@id":"https:\/\/www.ispreview.co.uk\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/ispreview","https:\/\/x.com\/ispreview","https:\/\/www.linkedin.com\/in\/mjack\/","https:\/\/bsky.app\/profile\/ispreview.bsky.social","https:\/\/mastodon.social\/@ispreview"]},{"@type":"Person","@id":"https:\/\/www.ispreview.co.uk\/#\/schema\/person\/de66a8b4e937c21c80e443d1bf9c35d5","name":"Mark Jackson","image":{"@type":"ImageObject","inLanguage":"en-GB","@id":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2023\/01\/nggallery_import\/Mark-Jackson-96x96.jpg","url":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2023\/01\/nggallery_import\/Mark-Jackson-96x96.jpg","contentUrl":"https:\/\/www.ispreview.co.uk\/wp-content\/uploads\/2023\/01\/nggallery_import\/Mark-Jackson-96x96.jpg","caption":"Mark Jackson"},"description":"By Mark Jackson Mark is a professional technology writer, IT consultant and computer engineer from Dorset (England), he also founded ISPreview in 1999 and enjoys analysing the latest telecoms and broadband developments. Find me on X (Twitter), Mastodon, Facebook, BlueSky, Threads.net and Linkedin.","sameAs":["http:\/\/www.ispreview.co.uk","https:\/\/www.facebook.com\/ispreview","https:\/\/x.com\/ispreview"],"url":"https:\/\/www.ispreview.co.uk\/index.php\/author\/markj"}]}},"_links":{"self":[{"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12423","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/comments?post=12423"}],"version-history":[{"count":0,"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/posts\/12423\/revisions"}],"wp:attachment":[{"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/media?parent=12423"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/categories?post=12423"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.ispreview.co.uk\/index.php\/wp-json\/wp\/v2\/tags?post=12423"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}