Facing no signal at all. But how can i tell if it is my isp blocking the imei?the model name in device information.
my isp always blocking my imei so I can't use their 5G signal. maybe they always see that I'm using router for their prepaid sim.
If no signal, doesn't think that a sign of the ISP blocking you (as the ISP cannot easily block a specific device from seeing their signal, the router will still pickup their signal but you just won't connect to it if they are blocking say your IMEI), maybe you have no signal where you at - mast may be down, so more likely the router playing up for some reason.Facing no signal at all. But how can i tell if it is my isp blocking the imei?
thanksInui brand one (BI-B63) 100W 25000mah
yeah that's the one. I wouldn't buy it for that price. good power bank but it was £30 before. There loads of power bank deals that come up on places like hotukdeals so keep an eye out there if you can wait.
i have full signal. the issue is that sometimes the router shows 0 leds.. only power led lit, and not signal and no connection VIA static ip with ETH cable to the router.If no signal, doesn't think that a sign of the ISP blocking you (as the ISP cannot easily block a specific device from seeing their signal, the router will still pickup their signal but you just won't connect to it if they are blocking say your IMEI), maybe you have no signal where you at - mast may be down, so more likely the router playing up for some reason.
People say different. More comments here about loosing password after factory reset
Have you solved the issue?No software upgrades.
The last thing I did, access root password , replaced superadmin password with the cmd procedure. locked to all available 4g bands. locked to 4g only.
and then while i browsing, wifi suddenly gone. after I saw the router, all led lights don't have lights. but still connected to power source.
when I switched off and on the power button, the restart looping occurs...
fortunately, it's still under warranty.
I just want to figure out, how to deal with that problem.
also, I bought a new one now. and don't want to let it happen again.
That's a possible sign of router resetting itself or boot looping.only power led lit,
Any solution?That's a possible sign of router resetting itself or boot looping.
Something must be causing it, so maybe the first thing to do is to try and diagnose why it may be resetting or boot looping, it could be either configuration issues or the SIM - someone who has this router was having boot-looping & reset issues with certain sims from specific providers - so have you tried other provider sims in the router and does it keep doing the same?Any solution?
rebooted many times and finally got access to the router. i run a factory reset and used different sim card. but still nothing... maybe something is wrong with the EEPROM\SOC\PowerSomething must be causing it, so maybe the first thing to do is to try and diagnose why it may be resetting or boot looping, it could be either configuration issues or the SIM - someone who has this router was having boot-looping & reset issues with certain sims from specific providers - so have you tried other provider sims in the router and does it keep doing the same?
Anyway not necessarily a solution so a suggestion (which means you do it at your own risk) - reflashing the firmware or updating the firmware may help (v1.15.1 is a stable version from what I hear).
Yeah maybe, don't have this router myself but have some idea so limited knowledge of it.rebooted many times and finally got access to the router. i run a factory reset and used different sim card. but still nothing... maybe something is wrong with the EEPROM\SOC\Power
try changing different telco sim card.Facing no signal at all. But how can i tell if it is my isp blocking the imei?
if you will change the imei, that's the time that super admin will changed. but if just factory reset. superadmin password will remain. btw, im using vn007+ version 1.13.5. i don't know to some firmware...People say different. More comments here about loosing password after factory reset
if you will change the imei, that's the time that super admin will changed. but if just factory reset. superadmin password will remain. btw, im using vn007+ version 1.13.5. i don't know to some firmware...
I am on 2.6.6
Can't find it.
Should i downgrade?
Thanks for your time and effort. I followed your method and I am able to flash the firsmware now, still don't have the correct firmware though. I had initially flashed the wrong firmware via web to my zlt x11. Its now not working. If anyone has a .pac file for zlt x11 which I can flash with SPD Flash Tool, Please share.
I have a 2nd working unit of zlt x11. I have posted a device information screenshot of that below if someone knowledgable and experienced can help me to get correct firmware. Thanks in advance.
View attachment 10484
Thank you for sharing. You have put lot of efforts.