mOrt
Casual Member
I've been using a CPE Pro on SMARTY for a few months without any issues. It normally jumps between 2 masts but the general speeds are over 60mb which is 4x the speed of our peak ADSL speed.
A couple of days ago I noticed the 4G speed dramatically drop to around 1.5mb and I noticed that the mast/cell ID has changed to one I've not seen before.
I know theres no way of forcing a mast selection but is there anywhere I can see if there is work going on to a mast or anything that could be forcing us to use this mast that is much further away?
I noticed last night around 10pm taht the router had jumped back on to the closer mast and we were back to 60mb+. But then this morning it has gone back to the further away mast and back down to 1-2mb.
The CELL_ID of the one we seem to be stuck on at the moment is 2595584.
Thanks!
A couple of days ago I noticed the 4G speed dramatically drop to around 1.5mb and I noticed that the mast/cell ID has changed to one I've not seen before.
I know theres no way of forcing a mast selection but is there anywhere I can see if there is work going on to a mast or anything that could be forcing us to use this mast that is much further away?
I noticed last night around 10pm taht the router had jumped back on to the closer mast and we were back to 60mb+. But then this morning it has gone back to the further away mast and back down to 1-2mb.
The CELL_ID of the one we seem to be stuck on at the moment is 2595584.
Thanks!























