If I have the right model it states it's 5G on this website benparker.Hi
I was thinking of buying a MikroTik Chateau 5G Router as found one for a decent price. Specially this model: D53G-5HacD2HnD-TC&RG502Q-EA
Seeing mixed information as to if it works with 5G network or it's just LTE only.
Does anyone own this and can advise please?
The model D53G-5HacD2HnD-TC&RG502Q-EA is a 5G device, if the router you found on ebay can only do LTE then it's a different model.Just asked a seller on eBay and was told this:
It's not from eBay but someone selling somewhat local to me. It is that model though.The model D53G-5HacD2HnD-TC&RG502Q-EA is a 5G device, if the router you found on ebay can only do LTE then it's a different model.
Judging by the price in the screenshot, I would say that indeed that is a LTe-only device, ie no 5G.
The model that you stated is for a 5G device afaik, check the mikrotik URL I linked previously.It's not from eBay but someone selling somewhat local to me. It is that model though.
He's not a neighbour and saying best I go to his place with a SIM, doesn't confirm if it does 5g, probably a bit ignorant.The model that you stated is for a 5G device afaik, check the mikrotik URL I linked previously.
Ask the neighbour if the router can do 5G, that's the easiest.
Otherwise you could go for another make and model. These units are pretty good, example:
Just bought the router today after I decided not to in the first place because the WiFi light didn't come on. Then read online needs to be enabled within the router.I have ont of these, brilliant router, but steep learning curve with RouterOS. It's definitely 5g and I've seen speeds over 600mbit on mine with Three. I usually aggregate band 1+3+n78+n78.
If you mean RouterOS then yes but the wireless option disappeared and only showed WiFi and there was no radio. I went back to what it was on 7.1.5.Have you updated the firmware to the latest version (RouterBoard as well)?
My SIM is detected in the router and I can see the stats etc. But why can't I go online? I gave it a static IP address and when I type in ip config in cmd, it says media disconnected i.e. the ethernet. It's deffo connected.If you're still having issues after an update, try resetting the configuration ('System\Reset Configuration'). Leave all the boxes unticked and that will take it back to it's factory defaults, which should get the wireless working.
Just at work. Do you happen to be on discord by any chance?When you look at 'Quick Set' on the web interface or Winbox which configuration is active? Also, is the bridge setup for all the interfaces (you should get an 'S' next to the ethernet port in the Interface List if it's available and an 'RS' if it's connected)?