Can anyone tell me why they no longer let me select bands individually?
Hi sam81,Can anyone tell me why they no longer let me select bands individually?
Can you please share the pictures of all 4G and 5G bands from the debug page with the latest Elisa version??Hey to all,
today i've received a new Software Version magically at OTA update!! Before i thought the OTA update doesn't work. It seems to be the newest Elisa one (MC7010_Elisa3_B10) The device works still fine with it. Some Options in the debug_page are now available like Cell Lock for example.
When you like look at the screens..
regards
chris
@rak093 no problem..Can you please share the pictures of all 4G and 5G bands from the debug page with the latest Elisa version??
A small remark. For this case band lock option might not have any difference, because:I am more interested in LTE band 40 as I am located in India . But the Chinese firmware doesn't have band lock option.
Hi, I have it bought from alibaba.com. its upgraded to latest chinese firmwarehello everyone, i recently bought the zte mc7010 from routerswitch.com, everything works fine but the firmware is from China mobile v1, i want to update it to v2 with ota but no update is available, anyone know how i can update the software to the stock version?
Hi @chris_nature @sam81 @Lucian . I have a new ZTE MC7010 with Chinese firmware, but unfortunately I am not able to flash it with Elisa firmware as when i open the ZTE Terminal Software update Framework tool. It doesn't detect the ZTE MC7010,Its telling its disconnected. Can someone gives a clear step by step guide and attach the correct flashing files to make it Elisa firmwareHi Rak. After the update i've got much higher speeds in my use case coming from a peak ~ 140 Mbits down and ~ 25 Mbits upload now to ~ 190 Mbits down and ~ 50 Mbits Up Speed. For my home location this is absolutely awesome
on the androidhost page you can find the steps in a pdf guideHi @chris_nature @sam81 @Lucian . I have a new ZTE MC7010 with Chinese firmware, but unfortunately I am not able to flash it with Elisa firmware as when i open the ZTE Terminal Software update Framework tool. It doesn't detect the ZTE MC7010,Its telling its disconnected. Can someone gives a clear step by step guide and attach the correct flashing files to make it Elisa firmware
I followed the steps however the ZTE terminal software update framework tool doesn't detect the Router. But only detecting the USB port to which the device is attachedon the androidhost page you can find the steps in a pdf guide
Assuming you are using a PC you may be missing a driver or Win10 is stopping the driver being installed, other possibility is you have an incorrect USB cable if a special one is needed.But only detecting the USB port to which the device is attached
on the androidhost page you can find the steps in a pdf guide
All drivers are installed correctly. USB cable is ok. Because the USB port is detected but not the deviceAssuming you are using a PC you may be missing a driver or Win10 is stopping the driver being installed, other possibility is you have an incorrect USB cable if a special one is needed.
That still points to a driver issue or something not right on the communication side between the router and the PC so its not fully recognised. Just had exactly the same issue with a Tractix box and a Win10 laptop, it was seen but only as a generic USB and did nothing, reinstalled the drivers and it then showed correctly as an 'Openport 2.0' . Alternatively within device manager update the driver for the USB connection, point it at the locally held drivers and update.Because the USB port is detected but not the device
I tried with all steps, but couldn't figure out the reason. To me the device doesn't show under COM PORTS in device manager and also showing as Composite USB device under USB section. Eventhough I have installed all drivers and software in the manner that are given in the manual in androidhost.ru website. I am clueless...That still points to a driver issue or something not right on the communication side between the router and the PC so its not fully recognised. Just had exactly the same issue with a Tractix box and a Win10 laptop, it was seen but only as a generic USB and did nothing, reinstalled the drivers and it then showed correctly as an 'Openport 2.0' . Alternatively within device manager update the driver for the USB connection, point it at the locally held drivers and update.