GroundControl
Regular Member
Has anyone managed to get the Cell ID lock working on a Zyxel router?
I've tried several times on my NR7101 (attached to 3uk) but it doesn't seem to work.
I have the band lock set to "auto" and then do the following:
1. Turn PCI Lock to "on"
2. Scan local cells
3. Pick the strongest signal from the list and type the PhyCellID number and RFCN number into the settings.
4. Then "apply" and reboot.
I've tried the 3 strongest cell sites and each time after a reboot the router hasn't connected to the network. If I turn the PCI lock to "off" and reboot the router attaches to one of the 3 cells - but won't do so with the lock set to "on".
I've tried several times on my NR7101 (attached to 3uk) but it doesn't seem to work.
I have the band lock set to "auto" and then do the following:
1. Turn PCI Lock to "on"
2. Scan local cells
3. Pick the strongest signal from the list and type the PhyCellID number and RFCN number into the settings.
4. Then "apply" and reboot.
I've tried the 3 strongest cell sites and each time after a reboot the router hasn't connected to the network. If I turn the PCI lock to "off" and reboot the router attaches to one of the 3 cells - but won't do so with the lock set to "on".























