
Openreach (BT) has just published the next batch (Tranche 23) of 132 exchanges in their “FTTP Priority Exchange” stop sell programme – covering 1.23 million premises. This reflects areas where over 75% of premises are able to get full fibre lines and will thus stop selling copper based legacy phone and broadband products (i.e. FTTP becomes the only product option, where it’s available).
Currently, there are two schemes for moving away from old copper lines and services, which can sometimes cross over a bit. The first starts with the gradual migration of traditional legacy voice (PSTN / WLR) services to digital all-IP technologies (e.g. SOGEA), which is due to complete by 31st January 2027 and is occurring on both copper and full fibre products (i.e. ISPs are introducing digital voice / VoIP services). The national “stop sell” on legacy phone services began on 5th September 2023 (here).
The second “FTTP Priority Exchange” programme involves the ongoing rollout of gigabit-capable Fibre-to-the-Premises (FTTP) lines – using light signals via optical fibre instead of electrical signals via slow copper lines. Only after this second programme has largely completed (75%+ FTTP coverage) in an exchange area can you really start to completely switch-off copper-based products, which will come later as you have to allow lots of time for natural customer migrations.
Advertisement
Between the scrapping of legacy phone services, the full fibre rollout and the gradual switch away from copper lines themselves, this process will take several years in each area to complete, and the pace will vary (i.e. some areas have better coverage of Openreach’s full fibre lines than others). Just to be clear, though, premises that can’t yet get FTTP will continue to be served by copper-based broadband products.
In this programme, the migration process away from legacy services starts with a “no move back” policy (i.e. no going back to copper) for premises connected with FTTP, which is followed by a “stop-sell” of copper services to new customers (12-months of notice is given before this starts and that is what today’s list represents). This stage is then followed by a final “withdrawal” phase, but that comes later.
The stop sell is applied at premises level, so it shouldn’t impact you if you don’t yet have access to FTTP, although edge-case conflicts may still occur due to rare quirks of network availability.
The 132 exchanges confirmed today takes the total number of exchange upgrades, by mid-February 2026, that have already been placed under active “stop sell” rules to 1,281 – reflecting 12.5 million premises or around 51% of Openreach’s full fibre footprint. The stop sells in today’s list will become effective from 12th February 2027.
Advertisement
James Lilley, Openreach’s Managed Customer Migrations Director, said:
“Our stop sell programme is a vital step in accelerating the UK’s transition to a modern full fibre future. As copper’s ability to support modern communications declines, the immediate focus is getting people onto newer, future proofed technologies.
By phasing out legacy copper-based services in areas where fibre is now widely available, we’re ensuring customers and providers move onto faster, more reliable, digital infrastructure. This approach not only reduces the cost and complexity of having to maintain both old and new networks but also supports the industry-wide migration ahead of the legacy copper-based Public Switched Telephone Network (PSTN) now just over 12-months away, by which time everyone will need a digital phone line.”
The operator also has a Stop Sells Page on their website, which makes it easy to see all the planned changes. Otherwise, the following list is tentative, so changes and delays will occur (exchanges can and are often shifted around into different tranches).
132 Stop Sell Exchanges in Tranche 23
| Exchange Name | Exchange Location |
| Aboyne (AHW) | Aboyne |
| Acomb (AAC) | York |
| Airth (ATR) | Airth |
| Avonmouth | Bristol |
| BANWELL | Weston-Super-Mare |
| Bardon Mill (BUM) | Tow House |
| Barrow (BRR) | Bury St Edmunds |
| Baslow (BCL) | Baslow |
| BELMONT | Belmont |
| Benburb | Tyrone |
| Biddulph (BCG) | Biddulph |
| Blackheath | Rowley Regis |
| Bookham (L/BK) | Leatherhead |
| Brean Down (JFN) | Burnham-on-Sea |
| Burton On Trent (BT) | Burton upon Trent |
| Carew (ZIU) | Sageston |
| Castor (ZCI) | Castor |
| Cayton Bay Uc (ZYA) | Scarborough |
| Chalfont Drive | Nottingham |
| Chatburn | Chatburn |
| Cliffe | Cliffe |
| Corby Glen (CMG) | Grantham |
| Corwen | Crowen |
| Crofton (ZEP) | Sharlston |
| Cropredy (ZOW) | Wardington |
| Darton | Barnsley |
| Daubhill | Greater Manchester – Bolton |
| Didcot | Didcot |
| Dipton (DCU) | Annfield Plain |
| Doune (DGJ) | Doune |
| Downhall (DHL) | Rayleigh |
| Draycott | Breaston |
| Dringhouses | York |
| Dumfries (DS) | Dumfries |
| Dunston | Gateshead |
| Dunure (DNR) | Dunure |
| East Langton (ELT) | Foxton (Harborough) |
| East Leake | East Leake |
| Edmonton (L/EDM) | Greater London – Enfield |
| Edwinstowe | Edwinstowe |
| Fairford (FAC) | Fairford |
| Garvald (GVD) | Garvald |
| Germoe (GKO) | Goldsithney |
| Glyndwr (GFY) | Carrog |
| Grantham (GM) | Grantham |
| Greenford | Greater London – Ealing |
| Harbury (HRU) | Harbury |
| Hardwicke | Gloucester |
| Harlescott | Shrewsbury |
| Havant (HFG) | Havant |
| Heacham (HEM) | Hunstanton |
| Heath And Reach (HRZ) | Heath and Reach |
| Helensburgh (HPB) | Helensburgh |
| Henham (FNM) | Henham |
| Hopeman (HPI) | Burghead |
| Hullavington (HVQ) | Hullavington |
| Kenfig Hill (KGH) | Pyle |
| Kibworth (KAY) | Kibworth Harcourt |
| Kirkby In Ashfield | Kirkby-in-Ashfield |
| Lapford (LVD) | Lapford |
| Larkhall | Larkhall |
| Larklane | Liverpool |
| Leominster (LDS) | Leominster |
| Liberton | Edinburgh |
| Littleborough | Greater Manchester – Rochdale |
| Llandyssul (LY) | Llandysul |
| Llanilar (LIL) | Llanilar |
| Llanilar | Lianilar |
| Llansteffan (LLM) | Llansteffan |
| Loganswell (LOW) | Newton Mearns |
| Luton (LOL) | Luton |
| Manorbier (MNF) | Jameston |
| Market Bosworth (MFU) | Barlestone |
| Mellor | Blackburn |
| Midcalder | East Calder |
| Middleton | Greater Manchester – Rochdale |
| Middleton On Sea (MZD) | Bognor Regis |
| Millom (MKF) | Millom |
| Moelfre (MFE) | Moelfre |
| New Luce (NLG) | New Luce |
| North Shore | Blackpool |
| Norton (XNB) | Stockton-on-Tees |
| Plymouth (PY) | Plymouth |
| Pontyates (PYH) | Pontyates |
| Pontycymmer (PEK) | Pontycymer |
| Porthtowan (PQW) | Mount Hawke |
| QUATT | Alveley |
| Rawmarsh | Rawmarsh |
| Red Row (REO) | Hadston |
| Romford South (L/RM) | Greater London – Havering |
| Rossett (RFB) | Rossett |
| Rothley | Mountsorrel |
| Rothwell (RFK) | Rothwell |
| Rowlands Gill (RGL) | Rowlands Gill |
| Royston | Royston |
| Rudyard (RUD) | Leek |
| Ruislip | Greater London – Hillingdon |
| Ryhope | Sunderland |
| Ryton (RGI) | Ryton |
| Salhouse (SAH) | Rackheath |
| Sapcote (SCT) | Stoney Stanton |
| Saundby (XYU) | Beckingham |
| Scarinish (SCL) | Scarinish |
| Seaham | Seaham |
| Selly Oak | Birmingham |
| Shap (SGA) | Shap |
| Skelmanthorpe (SMH) | Clayton West |
| Slamannan | Slamannan |
| South Clapham | Greater London – Wandsworth |
| Southport (SP) | Southport |
| Spennymoor (SON) | Spennymoor |
| Stanecastle | Irvine |
| Sticklepath (XAG) | South Zeal |
| Stobo (SDP) | Stobo |
| Streatham (L/STR) | Greater London – Lambeth |
| Street (SUG) | Street |
| Sunderland | Sunderland |
| Sutton Elms (SEM) | Broughton Astley |
| Tarskavaig (TVI) | Tarskavaig |
| Teignmouth (TG) | Teignmouth |
| Thrapston (TCS) | Thrapston |
| Todmorden (TM) | Todmorden |
| Trearddur Bay (TRR) | Trearddur |
| Velindre (VLD) | Waungilwen |
| Waterbeck (WWA) | Kirtleton |
| Watton At Stone (WDH) | Watton at Stone |
| Wellesbourne (WEE) | Wellesbourne |
| West Auckland (WEY) | Bishop Auckland |
| West Ayton (WYF) | East Ayton |
| Whitehaven (WN) | Whitehaven |
| Wishaw | Wishaw |
| Wombwell | Wombwell |
Advertisement
Does anyone know:
How long does it take between an exchange hitting 75% of premises having GEA-FTTP available to order and it being place on the “FTTP Priority List”?
My (very) elderly father’s exchange hit 75% about 3-months ago but is, as yet, not on “the list”.
His current contract (for GEA-FTTC) has just over a month to go.
He wants to switch providers, but he doesn’t want the hassle of having his DiG copper lead-in ducted.
[His front garden is on the site of a former livestock drinking pond, which was filled in with brick & concrete rubble, form the London Blitz, just before his house was built back in the 50’s.
Using a mole, to run 30m of 54/56 Duct, through concrete rubble could be an “interesting” experience.
His current lead-in, 5-pr Poly in armour, is immediately beneath the block paving.]